Divisions

FBE Coating

AlKubra International Company (FBE – AMGHRA) having 5,000 SQM yard, fully equipped semi-automatic blasting booth & Fusion bonded epoxy coating (FBE) facility in Amghra Industrial area, We have 50 qualified manpower to carried out Fusion bonded Epoxy coating systems including two NACE Level 2 qualified coating Inspectors, Engineers, approved blasters (KOC/KNPC), approved airless spray painters (KOC/KNPC), approved technicians (KOC/KNPC), highly skilled fork lift operators, industrial helpers and riggers.

Alkubrayard having semi-automatic blasting room 15X12X6Mtr, closed fusion bonded epoxy coating Booth 50X30X6Mtr, 50X20X6Mtr. Approximately 2,000SQM shaded area for blasting and coating activities, also have heating Oven for 6-meter length 2nos. & 12-meter oven 1 no., maximum heating capacity for ovens are 450 degrees Celsius.

FBE (Fusion Bonded Epoxy Coating) – Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect steel pipe used in pipeline construction, concrete reinforcing bars (rebar) and on a wide variety of piping connections, valves etc.
from CORROSION Application –
The FBE powder coating application has three essential stage
1. Steel surface is thoroughly cleaned
2. Cleaned metal part is heated to the recommended FBE powder application temperature
3. Application and curing stage.

AlKubra International Company (FBE – AMGHRA) having 5,000 SQM yard, fully equipped semi-automatic blasting booth & Fusion bonded epoxy coating (FBE) facility in Amghra Industrial area, We have 50 qualified manpower to carried out Fusion bonded Epoxy coating systems including two NACE Level 2 qualified coating Inspectors, Engineers, approved blasters (KOC/KNPC), approved airless spray painters (KOC/KNPC), approved technicians (KOC/KNPC), highly skilled fork lift operators, industrial helpers and riggers.

Alkubrayard having semi-automatic blasting room 15X12X6Mtr, closed fusion bonded epoxy coating Booth 50X30X6Mtr, 50X20X6Mtr. Approximately 2,000SQM shaded area for blasting and coating activities, also have heating Oven for 6-meter length 2nos. & 12-meter oven 1 no., maximum heating capacity for ovens are 450 degrees Celsius.

FBE (Fusion Bonded Epoxy Coating) – Fusion bonded epoxy coating, also known as fusion-bond epoxy powder coating and commonly referred to as FBE coating, is an epoxy-based powder coating that is widely used to protect steel pipe used in pipeline construction, concrete reinforcing bars (rebar) and on a wide variety of piping connections, valves etc.
from CORROSION Application –
The FBE powder coating application has three essential stage
1. Steel surface is thoroughly cleaned
2. Cleaned metal part is heated to the recommended FBE powder application temperature
3. Application and curing stage.

Cement Lining

AL KUBRA, all over the Kuwait to apply our highly specialized cement-mortar lining process. With proven results and years of experience in cement mortar lining, our process is the most cost effective way to rehabilitate an old line that has become craggy and corroded over time. It is also an ideal lining for new pipe before it is put into service.

Due to its unique chemical structure, the cement lining is a natural corrosion inhibitor and provides an excellent internal layer of protection against pipe corrosion. Additionally, its other benefits include increased water flow efficiency, leak stoppage, and red water elimination.

Call or Mail us for more information on cement lining and pipeline rehabilitation. We are confident that by using our services, you can save up to 60% over the cost of replacing an existing line and lengthen the life of your line by 50 to 100 years.

Fire Proofing

Most of the petrochemical, chemical processing, Gas processing, refinery facilities and facility utility application fields should protect from fire. Fire proofing applied directly to the steel, at various rates of application, which will be job dependent using standard plastering type equipment or continues mixer/ pump units. A spray gun with a property sized orifice with spray shield, and air pressure at the nozzle of approximately 140 KN/M2 (20psi) will provide the correct hangability, density and appearance.

We have near about eight years good experience in the fire proofing field; we have already done tanks, structural,etc

Internal Lining

ALKUBRA offers a complete range of coatings for gas, water or effluent transmission lines.

In gas transmission, the use of liquid epoxies brings substantial advantages. It protects against corrosion prior to installation and during production, which extends the life of the pipeline.

The reduced surface roughness improves flow efficiency which allows the operator to run fewer compression stations, so saving power and increasing the profitability of the line.

For potable water and effluent transmission lines, the hot-applied, solvent-free epoxies comply with all of the stringent environmental requirements. This lining has excellent corrosion properties and adhesion, a very smooth internal surface and a high resistance to abrasion. These characteristics maintain the purity of the product during transportation.

If requested by the customer, ALKUBRA can also provide in-situ cement mortar lining which offers good resistance to corrosion owing to the use of sulphate-resistant cement and the mortar’s structure.

Gunite Lining

AL KUBRA, all over the Kuwait to apply our highly specialized Gunite lining process. With proven results and years of experience in Gunite lining, our process is the most cost effective way.

Due to its unique chemical structure, the gunite lining is a natural corrosion inhibitor and provides an excellent protection against correction in tank areas.

Call or Mail us for more information on gunite lining of bund wall. We are confident that by using our services, you can save up to 60% over the cost comparing other methods.

Tank Lining

ALKUBRA Painting and Coatings division provides all types of surface coating solutions for aboveground storage tanks as well as industrial and marine applications such as piping and vessels.

A wide variety of internal and external applications are offered, including standard or special surface preparation, application methods and techniques and multi-coat systems, all designed to meet your specific needs.

Anticipated service, site, temperature, environmental and operating conditions vary considerably, so it is necessary that industrial painting and coating services accommodate these variable conditions.

Alkubra’s experienced personnel work closely with our customers and with coating manufacturers to determine the most appropriate coating system for the proposed application. Whether one is considering an epoxy, zinc rich epoxy, polyurethane, water acrylic, inorganic zinc, polyamide, phenolic, coal tar mastic, silicone, alkyd, enamel, vinyl-ester, latex, FRP or other type coating system, HMT can provide the expertise needed for a long lasting protective coating.

External Painting

AL KUBRA has the equipment to do the external lining for pipes varying from 1 inch diameter to pipes, fittings and tanks of massive size.

For most external lining system airless spray system is used for the application. Prior to the lining process the pipe should be blasted. The DFT and the painting system depend upon the client’s requirement.

Coating & Wrapping

ALKUBRA has the equipment to do the coating and wrapping for pipes varying from 1 inch diameter to pipes, fittings and tanks of massive size. Blasted pipes are applied with a coating of primer before wrapping are done. The wrapping is done when the primer is in touch dry condition. The wrapping material can be of one shade or two as per the requirement of the client. The wrapping process can be achieved by two methods. In the first case, the pipe is rotated at a constant rate and the wrapping applied on to it. In the second case, the pipe is kept stationary and the wrapping machine rotated around it. A double layer can be applied if required by the client. The wrapping is done tightly so that air bubbles are avoided during wrapping.

Heatshrink Sleeves

We are specialized in the applicator for field installation on pipe line operating between 40oC and 80oC in most cases these coating can be applied without the necessity of removing the pipe line from service or use of high steel preheat temperature, also we are specialized in the application of heat shrinks on the weld jointed pipes for any size.
The coating comes either as HTLP a sleeve for girth weld coating and bell-hole repairs or as retroclad, a tape for continues line coating, retroclad/HTLP consist of a thick radiation cross linked polyolefin backing coated with high-shear strength thermoplastic adhesive that is activated by a curable liquid epoxy contains 100% solid and cures upon installation of the sleeve or tape.

After applying the epoxy to a precleaned pipe surface the HTLP sleeve is wrapped around the pipe and a flexible closure is applied to form the sheet into a tube.

Similarly, the retroclad tape can be continuously wrapped around the pipe either by hand or by a conventional tape wrapping machine. With both products, the backing is heat recovered to provide an even tension that forces the moltan adhesive to flow and fill around all pipes irreoulantie. After application, the cured epoxy bonds result in very high adhesive strengths to both the steel and to the thermoplastic adhesive: these high shear stunt materials or able to resist soll stresses and backfilling.

The installed HTLP and retroclad products are both three layer coating (epoxy, thermoplastic adhesive, and cross linked polyolefin backing) that provides a tough, reliable high performance corrosion prevention system that is easily installed in field.
We have near about ten years experience in the heat shrink field.

Grit/Garnet Blasting

AL KUBRA has the equipment to do the blasting for pipes varying from 3 inch diameter to pipes, fittings and tanks of massive size. The blasting process can be broadly divided into External Blasting and Internal Blasting. The materials that are used for the blasting are sand, granite or Grit depending upon the requirement. A profile is created as per the client’s requirement. External Blasting is the process whereby sand or the relevant material is pneumatically blasted onto the metal surface to remove rust etc. The blasted surface is then air cleaned and if necessary washed down with solvents, to remove grease or oil spots, before painting.

Internal blasting is the process whereby a blasting machine is inserted into the pipe and winched along the pipe while pneumatically blasting the internals. The rate of movement depends upon the finished required.